I S Code Download


List of Indian Standard (Download)

  1. IS 456.2000
  2. IS 875.1987 part-1
  3. IS 875.1987 part-2
  4. IS 875.1987 part-3
  5. IS 875.1987 part-4
  6. IS 875.1987 part-5
  7. IS 962 : 1989
  8. IS 1343.1980
  9. IS 1343.2012
  10. IS 1786: 2008
  11. IS 1893.2002 Part-1
  12. IS 1893.2005 Part-4.pdf
  13. IS 1893.2005 Part-5.pdf
  14. IS 2506:1985 : General requirements for screed board concrete vibrators
  15. IS 2547-1: gypsum building plaster, Part 1: Excluding premixed lightweight plaster
  16. IS 2547-2: gypsum building plaster, Part 2: Premixed lightweight plaster
  17. IS 3370.2009 Part-1.pdf
  18. IS 3370.2009 Part-2.pdf
  19. IS 3370.1967 Part-3.pdf
  20. IS 3370.1967 Part-4.pdf
  21. IS 3646 Part 1 : Code of practice for interior illumination, Part 1 General requirements and recommendations for welding interiors
  22. IS 3696.1987 Part-1 : SAFETY CODE FOR SCAFFOLDS AND LADDERS
  23. IS 3696.1991 Part-2 Scoffolding & ladder
  24. IS 3764.1992.pdf
  25. IS 4014.1967 Part-1.pdf
  26. IS 4014.1967 Part-2.pdf
  27. IS 4081.1986.pdf
  28. IS 4130.1991.pdf
  29. IS 4138.1977.pdf
  30. IS 4453-2009: Subsurface Exploration by Pits, Trenches, Drifts and Shafts – Code of Practice
  31. IS 4756.1978.pdf
  32. IS 4912.1978.pdf
  33. IS 5121.1969.pdf
  34. IS 5916.1970.pdf
  35. IS 7272-1: Recommendation for Labour Output Constants for Building Work, Part 1: North Zone
  36. IS 7293.1974.pdf
  37. IS 7969.1975.pdf
  38. IS 9103.1999.pdf
  39. IS 9178-1979 Part 1: Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 1: General Requirements and Assessment of Loads
  40. IS 9178-1988 Part-2: Templates for Lettering and Symbols, Part 2: Slot Widths for Wood Cased Pencils, Clutch Pencils and Fine-Lead Pencils
  41. IS 9178-1979 Part-2: Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 2: Design Criteria
  42. IS 10067.1982.pdf
  43. IS 10291.1982.pdf
  44. IS 10262: 2009 Guidelines for concrete mix design proportioning
  45. IS 13415.1992.pdf
  46. IS 13416.1992 Part-1.pdf
  47. IS 13416.1992 Part-2.pdf
  48. IS 13416.1994 Part-3.pdf
  49. IS 13416.1994 Part-4.pdf
  50. IS 13416.1994 Part-5.pdf
  51. IS 13430.2012.pdf
  52. IS 13920.pdf
  53. SP 16.1980.pdf
  54. SP 34.1987.pdf    (handbook on concrete reinforcement and detailing)
  55. SP 27: Handbook of Method of Measurement of Buildings Works
  56. IS 14458 (Part 01) 1998 Guidelines for retaining wall for hill area, Part 1 Selection of type of wall
  57. IS 14458 (Part 02) 1997 Retaining Wall for Hill Area–Guidelines, Part 2 Design of Retaining Breast Walls
  58. IS 14458 (Part 03) 1998 Retaining Wall for Hill Area–Guidelines, Part 3 Construction of Dry Stone Walls
  59. IS 15183 2009 Part-1 Construction project management – Guidelines, Part 1 General
  60. IS 15183 2013 Part-2 Construction project management – Guidelines, Part 2 Time Management
  61. IS 15183 2002 Part-3 Guidelines for Maintenance Management of Buildings, Part 3 Labour
  62. IS 16172 : 2014 Reinforcement Couplers for Mechanical Splices of Bars in Concrete — Specification
  63. IS 16700-2017 Criteria for structural safety of tall concrete buildings
  • Methods of measurement of building and civil engineering works:
  1. IS 1200 1992 Part 1- Earthwork
  2. IS 1200 1974 Part 2- Concrete Works
  3. IS 1200 1976 Part 3- Brickwork
  4. IS 1200 1976 Part 4- stone masonry
  5. IS 1200 1982 Part 5- form work
  6. IS 1200 1974 Part 6- Refractory work
  7. IS 1200 1972 Part 7 hardware
  8. IS 1200 1993 Part 8- steel work and iron work
  9. IS 1200 1973 Part 9- roof covering (including cladding)
  10. IS 1200 1973 Part 10- ceiling and linings
  11. IS 1200 1977 Part 11 paving, floor finishes dado and skirting
  12. IS 1200 1976 Part 12- Plastering and Pointing
  13. IS 1200 1994 Part 13- Whitewashing, color washing, distempering and painting of building surfaces
  14. IS 1200 1984 Part 14 glazing
  15. IS 1200 (Part 15) 1987 Part 15- painting, polishing, varnishing etc
  16. IS 1200 (Part 16) 1979 Part 16- laying of water and sewer lines including appurtenant items
  17. IS 1200 1985 Part 17- Road Work including Airfield Pavements
  18. IS 1200 1974 Part 18- demolition and dismantling
  19. IS 1200 1981 Part 19- Water Supply, Plumbing and Drains
  20. IS 1200 1981 Part 20- laying of gas and oil pipelines
  21. IS 1200 1973 Part 21- Wood-work and joinery
  22. IS 1200 1982 Part 22- Materials
  23. IS 1200 1988 Part 23- Piling
  24. IS 1200 1983 Part 24 Well Foundations
  25. IS 1200 1971 Part 25- Tunnelling
  26. IS 1200 1987 Part 26- Acid resistant lining
  27. IS 1200 1992 Part 27- Earthwork done by mechanical appliances
  28. IS 1200 1992 Part 28- Sound insulation works
  29. IS 2720 1975 Part 29: Methods of Test for Soils, Part 29: Determination of Dry Density of Soils In-place by the Core-cutter Method

https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js

76 thoughts on “I S Code Download

  1. Sir, please share us IS – 1786 – High strength deformed steel bars and wires for concrete reinforcement – Specification

    Like

  2. We cannot found the IS code for ACP cladding measurement.Also for Facade work (Glass, Alluminium, ACP, etc). So Please post if you found.

    Like

    1. I didn’t get your requested code, found this code – “IS 1670: Textiles – Yarn – Determination of breaking load and elongation at break of single strand” if you want then inform here

      Like

Please suggestion or problem by Reply